Formfutura Python Flex TPU 90A 1.75mm | 500g

£30.99

Colour

Quantity

Item number: 8720574291315

Key Features:

Flexible with a shore hardness of 90A
Elongation up to 500%
Good resistance to chemicals and oils
Resistant to wear, tear, and abrasion
Thermal resistance up to 74°C

Application:

Manufacturing seals and gaskets
Protective bumpers and vibration dampers
Snap-fit applications
Various Orthopedic applications
3D printing sleeves and hinges

Description

Python Flex TPU 90A is an easy to print flexible filament. With a shore hardness of 90A, this filament is much softer than our Python Flex TPU 98A. Python Flex TPU 90A shows good adhesion to the print bed and has perfect inter-layer adhesion.

This industrial-grade TPU is designed for mechanical applications whereby resistance to wear, tear and abrasion are important. The filament also features good resistance to chemicals and UV radiation.

Specification


Diameter	1.75mm
Net weight	500g

Recommendation

Temperature

Print temp: 220 – 250° C

Heat bed: 0 – 60° C

Printing Speed

Fan

Fan speed: 50 - 100%

Surface

Magigoo® Flex

Closed Chamber

Nozzle Diameter

≥ 0.25mm

Note

Python Flex is a very hygroscopic material and will attract and hold water molecules from the surrounding environment. When opened and exposed to humidity too long this can have a negative effect on the printing behaviour and quality of the filament. It is therefore strongly recommended to immediately remove the spool from the printer after printing and store it in a vacuum bag or airtight container without silica. When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours. Drying times can depend on how long the filament has been exposed to humidity. Python Flex is packaged in a vacuum bag with a guaranteed moisture content of less than 0,2% to ensure ideal printing behaviour and results directly after opening the spool.